CONIPUR 2400 – further development of the pore sealer for outdoor use
18. November 2021
In the context of further development and improvement of our products, we are glad to present our new pore sealer, CONIPUR 2400, for outdoor use. CONIPUR 2400 was launched in the summer of 2021 and has replaced CONIPUR 203 in the tried and tested CONIPUR SW and CONIPUR ISP track surfacing systems as well as in all other applications.
The pore sealer or filler is used to seal in-situ installed elastic layers. This makes the surface waterproof. CONIPUR 2400 can also be applied to water-permeable asphalt to make it waterproof. The application is carried out either using a paver or by hand.
Advantages you should expect from CONIPUR 2400 as opposed to CONIPUR 203:
- lower consumption
- better price per m2
- higher elasticity
- reduced foam formation
- easier to work with
Properties of CONIPUR 2400
|CONIPUR 2400||2 components, solvent-free|
|Packaging||Supplied in the appropriate ratio of component A (resin) and component B (hardener)||T.A 21.6 kg|
T.A 4.1 kg
|Density||Mixture, at 23 °C||approx. 1.2 g/cm3|
|Accessible||at 23 °C and 50 % relative humidity||approx. 8 hours|
|Can be re-worked||after a maximum of||36 hours|
|Shore A hardness||after 28 days||approx. 65|
|Required amount||depending on the structure of the elastic layer and the climatic conditions||1.0 – 1.4 kg/m²|
We are convinced that the product we have put on the market, CONIPUR 2400, is an advanced product for sealing pores in outdoor floor coverings; the optimised price-performance ratio of the product is particularly impressive. Have we aroused your interest? If yes, please do not hesitate to contact your regional sales consultant or our customer service in Schaffhausen.